Featured

Haas DS-30Y CNC Lathe, 2020 - Tool Presetter, Parts Catcher, Live Tooling w/ C Axis, Haas Barfeeder



Published
Swing Diameter:
Over Front Apron: 31.8 in (806 mm)
Over Cross Slide: 20.8 in (527 mm)
Over Second Spindle: 21.8 in (552 mm)

Capacities:
Chuck Size: 10.0 in (254 mm)
Max Cutting Diameter (varies with turret): 18.0 in (457 mm)
Max Cutting Length (varies with workholding): 23.0 in (584 mm)
Bar Capacity: 3.00 in (76 mm)

Travels:
X Axis: 12.5 in (318 mm)
Z Axis: 23.0 in (584 mm)

Feedrates:
Rapids on X: 472 ipm (12.0 m/min)
Rapids on Y: 472 ipm (12.0 m/min)
Rapids on Z: 945 ipm (24.0 m/min)

Axis Motors:
Max Thrust X: 4100 lbf (18238 N)
Max Thrust Y: 2300 lbf (10231 N)
Max Thrust Z: 5100 lbf (22686 N)

Spindle:
Spindle Nose: A2-6
Drive System: Direct Speed, Belt Drive
Max Rating: 30.0 hp (22.4 kW)
Max Speed: 4500 rpm
Max Torque: 275 ft-lbf @ 600 rpm (373 Nm @ 600 rpm)
Spindle Bore ø: 3.50 in (88.9 mm)

Main Spindle C Axis:
Max Rating: 5.0 hp (3.7 kW)
Positioning (±) 0.01 °
Brake Clamp Force: 1000 lbf (4448 N)
Brake Diameter: 14.4 in (366 mm)
Control Type: Interpolated Motion and
Positioning

Secondary Spindle:
Chuck Size: 8.3 in (210 mm)
Spindle Nose A2-5
Drive System: Direct Speed, Belt Drive
Max Rating: 20.0 hp (14.9 kW)
Max Speed: 4800 rpm
Max Torque: 110 ft-lbf @ 700 rpm (149 Nm @ 700 rpm)
Spindle Bore ø: 2.00 in (50.8 mm)
Bar Capacity: 2.00 in (51 mm)

Secondary Spindle Positioning:
Brake Clamp Force: 500 lbf (2224 N)
Brake Diameter: 7.0 in (178 mm)
Control Type: Positioning Only

Turret:
Number of Tools: 12 Stations
OD vs ID Tools: Any Combination (will vary with turret)
Boring Bar Rear Clearance (from back of turret): 4.00 in (102.0 mm)

Live Tooling:
Max Speed: 6000 rpm
Drive Ratio: 1:1
Tooling: BMT65

General:
Coolant Capacity: 55 gal (208 L)

Air Requirements:
Air Required: 4 scfm @ 100 psi (113 L/min @ 6.9 bar)
Inline Air Hose: 3/8 in
Coupler (Air): 3/8 in
Air Pressure Min: 80 psi (5.5 bar)

Electrical Specification:
Spindle Speed: 4500 rpm
Drive System: Direct Speed, Belt Drive
Spindle Power: 30.0 hp (22.4 kW)
Input AC Voltage (3 Phase) - Low: 220 VAC
Full Load Amps (3 Phase) - Low: 70 A
Input AC Voltage (3 Phase) - High: 440 VAC
Full Load Amps (3 Phase) - High: 35 A

Dimensions - Shipping:
Domestic Pallet: 171 in x 90 in x 92 in (435 cm x 229 cm x 234 cm)
Export Pallet: 171 in x 90 in x 92 in (435 cm x 229 cm x 234 cm)
Weight: 16000 lb (7258.0 kg)

Bar Capacities:
Bar Diameter Range: 0.375" to 3.125" (9.5 mm to 79.4 mm)
Bar Length Capacity: 48" (1219 mm)
Recommended Max Bar Length in Spindle *: 48" (1219 mm)
Minimum Bar Length: 10" (254 mm)

Charging Tray:
Max Number of Bars to Load: Up to a 30" (762 mm) width when staged in charging tray; any combination of bar diameters
Max Weight of Total Bars: 650 lb 295 kg

Max Bar weight Capacity:
Lift Arm Max Weight Limit: 80 lb (36 kg)

Pushrod:
Maximum Thrust Push Limit: 100 lb (445 N)

Accuracy:
Positioning Without Deadstop **: ± 0.01" ± (0.25 mm)

General:
Interface: Directly to the Haas Control only
Power Requirements: Connects directly to the Haas Electrical Cabinet
Machine Weight: 900 lb (408 kg)

* It Is Recommended that The Maximum Length of Bar in The Spindle Does Not Exceed the Length of The Spindle Liner and Adapter Combination.
** With Recommended Pull-Back-Type Collet

Equipped With:
Standard Program Memory, 1 GB
4800-rpm Secondary Spindle
Visual Part Programming System
User-Definable Macros
55-Gallon Coolant Tank
BMT65 Driven Toolholder Kit
Standard Inch Sub-Spindle Toolholder Kit, BMT65 Turret
CNC Control Cabinet Cooler
10" Hydraulic Chuck, A2-6
8.3" Hydraulic Chuck, A2-5
4500-rpm Main Spindle, 3" Bore, 10" Chuck
Early Power-Failure Detection Module
Ethernet Interface
HaasConnect: Remote monitoring
HaasDrop
Media Display M-Code; M130
Rigid Tapping
Spindle Orientation
WiFi Connection for the Haas Control
Automatic Coolant Refill
Enclosure Exhaust System
Coolant Tank Oil Skimmer
Inch Measurement Units
6000-rpm Speed Upgrade for Live Tooling
4000-rpm Live Tooling with C axis, 24-Station BMT65 Turret
High-Pressure Coolant
Automatic Tool Presetter
Belt-Type Chip Conveyor, Lathe
Coolant Maintenance Package
Parts Catcher
WiFi Camera
Auxiliary Coolant Filter
Chip Tray Filter Kit
Driven Toolholder, 90 Degree, for BMT65 Turret
Driven Toolholder, Straight, for BMT65 Turret
HAAS BAR FEEDER
Category
Audio
Be the first to comment